Standing Seam Roof Roll forming machine with Chrome Bar Bolted Stand, CE Approval

Standing seam roof roll forming machine, standing roofing forming machine is to make the standing seam roof cladding system which is a typical roofing system. Standing seam machine is to make the standing seam roof panels. The standing seam machine line has a main forming machine and a biting machine to joint the panels for installation. Basically, Roof Cladding the system will be installed on a steel construction which is carried by a steel structure. Main procedure is described below:

Main Parameter
1) Steel Material: Q235,
2) thickness of material: 0.4-0.8mm
3) Feeding Width Max: 600mm
4) Capacity of Decoiler: 5000 kg
5) Inner Diameter of the Coiler: 500-600mm
6) Outer Diameter of the Coiler: 1800mm
7) Forming steps: 15 steps
8) Driving System: Chain Transmission
9) Power of main motor: 5.5kw,3phases, 415V, 50Hz
10) Reducer: Cycloid Pin
11) Power of Hydraulic cutting Machine: 3kw
12) Forming Speed Max: 15m/min
13) Dimension (L*W*H) and Layout:
Manual Decoiler: 1.1m*1.8m*1.2m
Main Machine: 7m*1.5m*1.3m
Runout Table: 4m*0.6m*0.8m

Standing Seam Roof Roll forming machine with Chrome Bar Bolted Stand, CE Approval Images